QuakeWorld Client Console Commands
Abstract
Author: JakFrost
Email: jakfrost(at)planetquake(dot)com
Web Site: http://www.planetquake.com/console/
Created: April 21, 1997
Last Modified: May 18, 2000
Based On: QuakeWorld v2.30
Source: http://www.planetquake.com/console/commands/quakeworld_client.html
Copyright (C) 1997-2000 JakFrost, All Rights Reserved
This is the complete list of console commands, console variables, and command line parameters for QuakeWorld Client. All console commands and variables are identified, documented, tagged, and classified. This document has been designed to help out all those people who want to customize the game to their liking.
Table Of Contents
- Introduction
- Command Types Key
- Console Commands List
- Command Line Parameters List
- Version Information
- Legal
1. Introduction
This is the complete list of commands for the QuakeWorld Client. All commands are identified, documented, tagged, and classified. With permission, I have used the work of Daniel “Prog” Rinehart and information from his web site – Quake Console Command Pages – to complete my list. I have also visited the QuakeWorld Central Console List a few times to gain some insight into a couple of troubling commands. A small thanks also goes to David “Zanshin” Van de Ven from Zanshin’s GLQuake Dojo for explaining one or two of the glQuake commands.
2. Command Types Key
- Action:
- Performs an action when the
+actionpart of the command is executed and terminates that action when the-actionpart of the command is executed. When an action command is bound to a key, the+actionis executed with the key is pressed, and the-actionis executed when the key is released. The default syntax is “+action” or “-action“. - Command:
- Performs a command, sometimes with extra parameters. The default syntax is “
command“. - OpenGL:
- Only available in OpenGL version.
- Parameter:
- Command line parameter used upon launching the executable file. The Type field is not shown for parameters because of the seperate list. The default syntax is “
-parameter“. - Toggle:
- Toggles the setting between known attributes, usually on and off only. The default syntax is “
command(0|1)“. - Variable:
- Allows for the change of a game variable with numeric input. The default syntax is “
command(value)“.
3. Console Commands List
- +attack
-
Type: Action
Description: When active the player is firing the weapon.
- +back
-
Type: Action
Description: When active the player is moving backwards.
- +forward
-
Type: Action
Description: When active the player is moving forward.
- +jump
-
Type: Action
Description: When active the player is jumping.
- +klook
-
Type: Action
Description: When active,
+forwardand+backbecome+lookupand+lookdownrespectively. - +left
-
Type: Action
Description: When active the player is turning left.
- +lookdown
-
Type: Action
Description: When active the player’s view is looking down.
- +lookup
-
Type: Action
Description: When active the player’s view is looking up.
- +mlook
-
Type: Action
Description: When active moving the mouse or joystick forwards and backwards performs
+lookupand+lookdownrespectively. - +movedown
-
Type: Action
Description: When active the player is swimming down in a liquid.
- +moveleft
-
Type: Action
Description: When active the player is strafing left.
- +moveright
-
Type: Action
Description: When active the player is strafing right.
- +moveup
-
Type: Action
Description: When active the player is swimming up in a liquid.
- +right
-
Type: Action
Description: When active the player is turning right.
- +showscores
-
Type: Action
Description: Display information on everyone playing.
- +showteamscores
-
Type: Action
Description: Display information on team players.
- +speed
-
Type: Action
Description: When active the player is running.
Note: This will use the
cl_movespeedkeyvariable to multiply thecl_forwardspeedandcl_backspeedvariables. - +strafe
-
Type: Action
Description: When active,
+leftand+rightfunction like+moveleftand+moveright, strafing in that direction. - +use
-
Type: Action
Description: * Non-functional. Left over command for opening doors and triggering switches.
- _snd_mixahead
-
Type: Variable
Default:
0.1Description: Delay time for sounds.
- _vid_default_mode
-
Type: Variable
Default:
0Description: Default video mode.
- _vid_default_mode_win
-
Type: Variable
Default:
3Description: Default windowed video mode.
- _vid_wait_override
-
Type: Toggle
Default:
0Description: Toggles the wait for vertical sync for video modes.
Values:
0– Can cause shearing and screen glitching.
1– Will prevent shearing and screen glitching for a performance trade off.
Note: Will take effect on next video mode switch.
- _windowed_mouse
-
Type: Toggle
Default:
0Description: Toggles windowed mouse support.
Note: To regain mouse support to other applications, use ALT+TAB to switch away from Quake.
- alias
-
Type: Command
Syntax:
alias(name) (command)Description: Used to create a reference to a command or list of commands. When used without parameters, displays all current aliases.
Note: Enclose multiple commands within quotes and seperate each command with a semi-colon.
Example:
alias sayhi “say Hi foo!”
alias quickaxe “impulse 1;wait;+attack;wait;-attack”
- allskins
-
Type: Command
Syntax:
allskinsDescription: Download all skins that currently in use. Useful for refreshing skins without exiting the level.
Note: Same as the skins command.
- ambient_fade
-
Type: Variable
Default:
100Description: How quickly ambient sounds fade in or out.
Note: Higher values make the sounds fade quicker.
- ambient_level
-
Type: Variable
Default:
0.3Description: Ambient sounds’ volume.
- baseskin
-
Type: Command
Syntax:
baseskin(filename)Default:
baseDescription: Default skin that other players not using a skin will be viewed as.
- bf
-
Type: Command
Syntax:
bfDescription: Background flash, used when you pick up an item.
- bgmbuffer
-
Type: Variable
Default:
4096Description: Amount of memory allocated for the CD music buffer.
- bgmvolume
-
Type: Variable
Default:
1.0Description: Volume of CD music.
- bind
-
Type: Command
Syntax:
bind(key) (command)Description: Assign a command or a set of commands to a key.
Note: To bind multiple commands to a key, enclose the commands in quotes and separate with semi-colons. To bind to non-printable keys, use the key name.
Key Name List: Escape, F1-F12, pause, backspace, tab, semicolon, enter, shift, ctrl, alt, space, ins, home, pgup, del, end, pgdn, uparrow, downarrow, leftarrow, rightarrow, mouse1-mouse3, aux1-aux9, joy1-joy4, mwheelup, mwheeldown
Special: The escape, and ~ (tilde) keys can only be bound from an external configuration file.
Example:
bind h “echo Hi Foo!”
bind mouse1 “+attack;+jump;wait;-jump;-attack;echo Foo!”
- block_switch
-
Type: Toggle
Default:
0Description: * Unknown.
- bottomcolor
-
Type: Command
Default:
0Description: Sets the pants color.
Note: If the color is set to a large value,
666for example, the color will be changed to a random neon color at random intervals. - cd
-
Type: Command
Syntax:
cd(command)Description: Control the CD player.
Commands:
eject– Eject the CD.
info– Reports information on the CD.
loop(track number) – Loops the specified track.
remap(track1) (track2) … – Remap the current track order.
reset– Causes the CD audio to re-initialize.
resume– Will resume playback afterpause.
off– Shuts down the CD audio system..
on– Re-enables the CD audio system after acd offcommand.
pause– Pause the CD playback.
play(track number) – Plays the specified track one time.
stop– Stops the currently playing track.
Example:
cd play 4
cd remap 9 8 7 6 5 4 3 2 1
- centerview
-
Type: Command
Syntax:
centerviewDescription: Centers the player’s view ahead after
+lookupor+lookdown.Note: Does not work when
+mlookis active. - changing
-
Type: Command
Syntax:
changingDescription: * Non-functional.
- cl_anglespeedkey
-
Type: Variable
Default:
1.5Description: Sets multiplier for how fast you turn when running.
- cl_backspeed
-
Type: Variable
Default:
200Description: Backward movement rate.
- cl_bob
-
Type: Variable
Default:
0.02Description: How much your weapon moves up and down when walking.
- cl_bobcycle
-
Type: Variable
Default:
0.6Description: How quickly your weapon moves up and down when walking.
- cl_bobup
-
Type: Variable
Default:
0.5Description: How long your weapon stays up before cycling when walking.
- cl_chasecam
-
Type: Variable
Default:
0Description: Toggles the spectator mode to eye view.
- cl_crossx
-
Type: Variable
Default:
0Description: Sets the position of the crosshair on the X-axis.
- cl_crossy
-
Type: Variable
Default:
0Description: Sets the position of the crosshair on the Y-axis.
- cl_forwardspeed
-
Type: Variable
Default:
200Description: Sets forward movement rate.
- cl_hightrack
-
Type: Toggle
Default:
0Description: Toggles camera view to always follow the player with the highest gib count.
- cl_hudswap
-
Type: Toggle
Default:
0Description: Toggle left or right position of the weapons HUD for the new status bar.
- cl_maxfps
-
Type: Variable
Default:
0Description: Set the maximum limit for frames-per-second.
Note: Your frames-per-second rate is directly tied to the rate at which you receive packets from the server. If you set this value too high then you modem will not be able to handle the loads of getting a pack for each frame.
- cl_movespeedkey
-
Type: Variable
Default:
2.0Description: Set multiplier for how fast you move when running.
Note: This will multiply the values of
cl_forwardspeedandcl_backspeed, by the specified value. - cl_nodelta
-
Type: Toggle
Default:
0Description: Toggle network packet delta compression.
- cl_nopred
-
Type: Toggle
Default:
0Description: Toggle prediction.
- cl_pitchspeed
-
Type: Variable
Default:
150Description: How fast you
+lookupand+lookdown. - cl_predict_players
-
Type: Toggle
Default:
1Description: Toggle player prediction.
- cl_rollangle
-
Type: Variable
Default:
2.0Description: How much your screen tilts when strafing.
- cl_rollspeed
-
Type: Variable
Default:
200Description: How quickly you straighten out after strafing.
- cl_sbar
-
Type: Toggle
Default:
0Description: Toggles the display of the new transparent HUD.
- cl_shownet
-
Type: Toggle
Default:
0Description: Toggle the display of current net info.
- cl_sidespeed
-
Type: Variable
Default:
350Description: How quickly you strafe.
- cl_solid_players
-
Type: Toggle
Default:
1Description: Toggle if other players are solid or soft.
- cl_timeout
-
Type: Variable
Default:
60Description: Timeout value in seconds for server disconnection.
- cl_upspeed
-
Type: Variable
Default:
200Description: How quickly you
moveupandmovedownin liquids. - cl_warncmd
-
Type: Toggle
Default:
0Description: Toggles the display of error messages for unknown commands.
- cl_yawspeed
-
Type: Variable
Default:
140Description: How quickly you turn left or right.
- clear
-
Type: Command
Syntax:
clearDescription: Clears the console screen.
- cmd
-
Type: Variable
Syntax:
cmd(command) (value)Description: Send a command to the server.
Commands:
download– Same as the command.
kill– Same as the command.
msg(value) – Same as the command.
prespawn(entity) (spot) – Find a spawn spot for the player entity.
spawn(entity) – Spawn the player entity.
setinfo– Same as the command.
serverinfo– Same as the command.
Example:
cmd msg 2 - color
-
Type: Command
Syntax:
color(shirt color) (pants color)Default:
0 0Description: The pant and shirt color.
Note: If only the shirt color is given, the pant color will match.
Example:
color 12
color 4 11
- con_notifytime
-
Type: Variable
Default:
3Description: The time in seconds that messages are displayed on screen.
- connect
-
Type: Command
Syntax:
connect(IP address:port)Description: Connect to a QuakeWorld server.
Example:
connect 123.123.123.123
connect 123.123.123.123:27501
- crosshair
-
Type: Toggle
Syntax:
crosshair(0|1|2)Default:
0Description: Toggle the display of an aiming crosshair.
Values:
0– Crosshair Disabled.
1– Crosshair Enabled.
2– Crosshair Enabled (Alternative).
- crosshaircolor
-
Type: Variable
Syntax:
crosshaircolor(color)Default:
79Description: The color of the crosshair.
- d_mipcap
-
Type: Variable
Syntax:
d_mipcap(0|1|2|3)Default:
0Description: Detail level.
Values:
0– High detail level.
1– Medium detail level.
2– Low detail level.
3– Minimum detail level.
- d_mipscale
-
Type: Variable
Default:
1Description: How much detail objects have.
Values:
0– Full detail to objects.
1– Some detail to objects.
2– Medium detail to bjects.
3– Low detail to objects.
- d_subdiv16
-
Type: Toggle
Default:
1Description: Toggle extreme perspective correction.
- developer
-
Type: Variable
Default:
0Description: Toggle display of extra debugging information.
- disconnect
-
Type: Command
Syntax:
disconnectDescription: Disconnect from server.
- download
-
Type: Command
Syntax:
download(filename)Description: Manually download a quake file from the server.
Example:
download skins/foo.pcx - echo
-
Type: Command
Syntax:
echo(string)Description: Print text to console.
Example:
echo Hi Foo! - entlatency
-
Type: Variable
Default:
20Description: * Unknown.
- exec
-
Type: Command
Syntax:
exec(filename)Description: Execute a script file.
Example:
exec mysetup.cfg - flush
-
Type: Command
Syntax:
flushDescription: Clears the current game cache.
- force_centerview
-
Type: Command
Syntax:
force_centerviewDescription: Will center the screen irrelevant of
+klookand+mlookcommands. - fov
-
Type: Variable
Default:
90Description: Field of vision, which determines how close your vision field is to the objects.
- fullinfo
-
Type: Command
Syntax:
fullinfo(variables)Description: Used by QuakeSpy and Qlist to set
setinfovariables.Note: Use the
setinfocommand to see the output.Example:
fullinfo “\quote\I am the only Foo!\” - fullserverinfo
-
Type: Command
Syntax:
fullserverinfoDescription: Used by QuakeSpy and Qlist to obtain server varibles.
- gamma
-
Type: Variable
Default:
0.0Description: Brightness level.
- gl_affinemodels
-
Type: Toggle | glQuakeWorld
Default:
0Description: * Non-functional.
- gl_clear
-
Type: Toggle | glQuakeWorld
Default:
0Description: * Non-functional.
- gl_cshiftpercent
-
Type: Variable | glQuakeWorld
Default:
100Description: The percentage value for pallet shifting effects.
- gl_cull
-
Type: Toggle | glQuakeWorld
Default:
1Description: * Non-functional.
- gl_flashblend
-
Type: Toggle | glQuakeWorld
Default:
1Description: Toggles the type of lighting for objects.
- gl_keeptjunctions
-
Type: Toggle | glQuakeWorld
Default:
1Description: Toggles the removal of colinear vertexes upon level loadup.
- gl_max_size
-
Type: Variable | glQuakeWorld
Default:
256Description: Determines the detail level for loaded textures.
- gl_nobind
-
Type: Toggle | glQuakeWorld
Default:
0Description: Toggle the binding of textures to models and walls.
- gl_nocolors
-
Type: Toggle | glQuakeWorld
Default:
0Description: * Non-functional.
- gl_picmip
-
Type: Variable | glQuakeWorld
Default:
0Description: Determines the dimensions of displayed textures.
Values:
0– Original size.
1– Half the dimensions.
2– One-fourth the dimensions.
- gl_playermip
-
Type: Variable | glQuakeWorld
Default:
0Description: Determines the detail level of player skins.
Values:
0– Full detail.
1– Medim detail.
2– Low detail.
- gl_polyblend
-
Type: Toggle | glQuakeWorld
Default:
1Description: Toggle the color changing when submerged or when power-ups are active.
- gl_reportjunctions
-
Type: Toggle | glQuakeWorld
Default:
0Description: * Non-functional.
- gl_smoothmodels
-
Type: Toggle | glQuakeWorld
Default:
1Description: * Non-functional.
- gl_subdivide_size
-
Type: Variable | glQuakeWorld
Default:
128Description: Sets the division value for the sky brushes.
Note: The higher the value the better the performance but the smoothness of the sky suffers. A value of 256 seems like a good setting.
Credit: Zanshin
- gl_texsort
-
Type: Toggle | glQuakeWorld
Default:
1Description: * Non-functional.
- gl_texturemode
-
Type: Command | glQuakeWorld
Syntax:
gl_texturemode(textre mapping type)Default:
GL_LINEAR_MIPMAPDescription: Determines the texture mapping to be used.
Values:
GL_NEAREST– Point sampled.
GL_LINEAR_MIPMAP– Default.
GL_LINEAR_MIPMAP_LINEAR– Trilinear interpolation.
Example:
gl_texturemode GL_LINEAR_MIPMAP - gl_ztrick
-
Type: Toggle | glQuakeWorld
Default:
1Description: Toggles the clearing of the Z-buffer.
- help
-
Type: Command
Syntax:
helpDescription: Display Quake help.
- host_speeds
-
Type: Toggle
Default:
0Description: Toggle the display of processing info. Display is in milliseconds and represents the processing time for each sub-system.
Order of display: total time, server time, graphics time, and sound time.
- impulse
-
Type: Command
Syntax:
impulse(number)Description: Call a game function or QuakeC function.
Impulses:
1– Select Axe.
2– Select Shotgun.
3– Select Double-Barrelled Shotgun.
4– Select Nailgun.
5– Select Super-Nailgun.
6– Select Grenade Launcher.
7– Select Rocket Launcher.
8– Select ThunderBolt.
9– Weapons, Keys, and Ammunition cheat.
10– Select the next weapon.
11– Rune cheat.
12– Select the previous weapon.
255– Quad cheat.
Example:
impulse 9 - joyadvanced
-
Type: Toggle
Default:
0Description: Toggle use of advanced joystick features.
Note: This command will toggle the use of all the
joyadv*commands. - joyadvancedupdate
-
Type: Command
Syntax:
joyadvancedupdateDescription: Initialize the joystick’s advanced features.
- joyadvaxisr
-
Type: Variable
Default:
0Description: Mapping of the joystick r-axis.
Values:
0– Axis not used.
1– Axis is for forward and backward movement.
2– Axis is for pitch.
3– Axis is for side to side movement.
4– Axis is for yaw.
16+ ? – Axis mapping is relative (no stop points).
Example:
joyadvaxisr 2
joyadvaxisr 18
- joyadvaxisu
-
Default:
0Description: Mapping of the joystick u-axis.
Values:
0– Axis not used.
1– Axis is for forward and backward movement.
2– Axis is for pitch.
3– Axis is for side to side movement.
4– Axis is for yaw.
16+ ? – Axis mapping is relative (no stop points).
Example:
joyadvaxisu 2
joyadvaxisu 18
- joyadvaxisv
-
Default:
0Description: Mapping of the joystick v-axis.
Values:
0– Axis not used.
1– Axis is for forward and backward movement.
2– Axis is for pitch.
3– Axis is for side to side movement.
4– Axis is for yaw.
16+ ? – Axis mapping is relative (no stop points).
Example:
joyadvaxisv 2
joyadvaxisv 18
- joyadvaxisx
-
Default:
0Description: Mapping of the joystick x-axis.
Values:
0– Axis not used.
1– Axis is for forward and backward movement.
2– Axis is for pitch.
3– Axis is for side to side movement.
4– Axis is for yaw.
16+ ? – Axis mapping is relative (no stop points).
Example:
joyadvaxisx 2
joyadvaxisx 18
- joyadvaxisy
-
Default:
0Description: Mapping of the joystick y-axis.
Values:
0– Axis not used.
1– Axis is for forward and backward movement.
2– Axis is for pitch.
3– Axis is for side to side movement.
4– Axis is for yaw.
16+ ? – Axis mapping is relative (no stop points).
Example:
joyadvaxisy 2
joyadvaxisy 18
- joyadvaxisz
-
Default:
0Description: Mapping of the joystick z-axis.
Values:
0– Axis not used.
1– Axis is for forward and backward movement.
2– Axis is for pitch.
3– Axis is for side to side movement.
4– Axis is for yaw.
16+ ? – Axis mapping is relative (no stop points).
Example:
joyadvaxisz 2
joyadvaxisz 18
- joyforwardsensitivity
-
Type: Variable
Default:
-1.0Description: Determines the ramp-up speed for moving forward and backward.
Note: Negative values will reverse movement.
- joyforwardthreshold
-
Type: Variable
Default:
0.15Description: Controls the dead-zone for moving forward and backward.
- joyname
-
Type: Command
Syntax:
joyname(string)Description: Joystick Name.
Example:
joyname “My Favorite Joystick” - joypitchsensitivity
-
Type: Variable
Default:
1.0Description: Speed that you look up and down.
Note: Negative values will reverse movement.
- joypitchthreshold
-
Type: Variable
Default:
0.15Description: Dead-zone for looking up and down.
- joysidesensitivity
-
Type: Variable
Default:
-1.0Description: Ramp-up speed for moving side to side.
Note: Negative values will reverse movement.
- joysidethreshold
-
Type: Variable
Default:
0.15Description: Dead-zone for moving side to side.
- joystick
-
Type: Toggle
Description: Toggle the use of joystick.
- joywwhack1
-
Type: Variable
Default:
0.0Description: * Unknown.
- joywwhack2
-
Type: Variable
Default:
0.0Description: * Unknown.
- joyyawsensitivity
-
Type: Variable
Default:
-1.0Description: Speed that you look left to right.
Note: Negative values will reverse movement.
- joyyawthreshold
-
Type: Variable
Default:
0.15Description: Dead-zone for looking left and right.
- kill
-
Type: Command
Syntax:
killDescription: Suicide.
- loadas8bit
-
Type: Toggle
Default:
0Description: Toggles if sounds are loaded as 8-bit samples.
- lookspring
-
Type: Toggle
Default:
0Description: Toggles if the view will recenter after
+mlookis deactivated.Note: Only works with the mouse and joystick.
- lookstrafe
-
Type: Toggle
Default:
0Description: Toggles if turn left and right will strafe left and right when a
+mlookis active. - m_filter
-
Type: Toggle
Default:
0Description: Toggle mouse input filtering.
Note: Enabling this will average the last mouse position and the current mouse position.
- m_forward
-
Type: Variable
Default:
1Description: How quickly moving the mouse forwards and backwards causes the player to move in the respective direction.
- m_pitch
-
Type: Variable
Default:
0.022Description: How quickly you look up and look down with the mouse when a
mlookis active.Note: Using a negative value will reverse the directions.
- m_side
-
Type: Variable
Default:
0.8Description: How quickly you strafe left and right with the mouse.
- m_yaw
-
Type: Variable
Default:
0.022Description: How quickly you turn left and right with the mouse.
- menu_keys
-
Type: Command
Syntax:
menu_keysDescription: Brings up the key customization menu.
- menu_main
-
Type: Command
Syntax:
menu_mainDescription: Brings up the main menu.
- menu_options
-
Type: Command
Syntax:
menu_optionsDescription: Brings up the options menu.
- menu_quit
-
Type: Command
Syntax:
menu_quitDescription: Brings up the quit dialog box.
- menu_video
-
Type: Command
Syntax:
menu_videoDescription: Brings up the video option menu.
- messagemode
-
Type: Command
Syntax:
messagemodeDescription: Prompts for string to broadcast to all other players.
- messagemode2
-
Type: Command
Syntax:
messagemode2Description: Prompts for string to broadcast to team members.
- msg
-
Type: Command
Syntax:
msg(0|1|2|3|4)Default:
1Description: Determines the type of messages reported.
Values:
0– Maximum reporting of messages.
1– Parsed reporting of messages.
2– Limited reporting of messages.
3– Minimal reporting of messages.
4– No reporting of messages.
- name
-
Type: Command
Syntax:
name(name)Default:
PlayerDescription: Player’s name.
Example:
name Foo - noaim
-
Type: Toggle
Default:
0Description: Toggle client side auto-aiming.
- noskins
-
Type: Variable
Syntax:
noskins(0|1|2)Default:
0Description: Toggle the display and downloading of skins.
Values:
0– Enable skins.
1– Disable skins.
2– Enable skins but do not download new skins.
- nosound
-
Type: Toggle
Default:
0Description: Toggles if sound playback.
- packet
-
Type: Command
Syntax:
packet(destination) (contents)Description: Send a packet with specified contents to the destination.
Example:
packet 123.123.123.123:27500 “status” - password
-
Type: Command
Syntax:
password(string)Default:
1Description: Set the password to enter a password protected server.
- path
-
Type: Command
Syntax:
pathDescription: Show what paths Quake is using.
- play
-
Type: Command
Syntax:
play(filename)Description: Play a sound effect.
Example:
play misc/runekey.wav - playdemo
-
Type: Command
Syntax:
playdemo(filename)Description: Play a recorded demo.
Example:
play foo.qwd - playvol
-
Type: Command
Syntax:
playvol(filename) (volume)Description: Play a sound at a given volume.
Example:
playvol items/protect.wav .5
playvol items/protect.wav 2
- pointfile
-
Type: Command
Syntax:
pointfile(filename)Description: Load a pointfile to determine map leaks.
Example:
pointfile mymap - precache
-
Type: Toggle
Default:
1Description: Toggle the use of a precache.
- pushlatency
-
Type: Variable
Default:
-50Description: Pushlatency adjusts client side prediction by negating the effects of latency.
Note: Use the negative value of your ping to achieve the best results.
Example:
pushlatency -250 - qport
-
Type: Variable
Default:
(random)Description: The internal port number for the game networking code.
Note: This command was implemented in order to help people who use Network Address Translation schemes to connect multiple clients on their small LAN to play games on the Internet with only one IP address.
- quit
-
Type: Command
Syntax:
quitDescription: Exit the game.
- r_aliastransadj
-
Type: Variable
Default:
100Description: * Non-functional. Determines how much of an alias model is clipped away and how much is viewable.
Credit: Squirrel Eiserloh
- r_aliastransbase
-
Type: Variable
Default:
200Description: * Non-functional. Determines how much of an alias model is clipped away and how much is viewable.
Credit: Squirrel Eiserloh
- r_ambient
-
Type: Variable
Default:
0Description: * Non-functional. Determines the ambient lighting for a level.
- r_clearcolor
-
Type: Variable
Default:
2Description: This sets the color for areas outside of the current map.
Note: Only available for spectators.
- r_drawentities
-
Type: Toggle
Default:
1Description: Toggles the drawing of entities.
- r_drawflat
-
Type: Toggle
Default:
0Description: * Non-functional. Toggles the drawing of textures.
- r_draworder
-
Type: Toggle
Default:
0Description: * Non-functional. Toggles the drawing order, x-ray mode.
- r_drawviewmodel
-
Type: Toggle
Default:
1Description: Toggles the drawing of your weapon.
- r_dspeeds
-
Type: Toggle
Default:
0Description: Toggles the display of drawing speed information.
- r_dynamic
-
Type: Toggle | glQuakeWorld
Default:
1Description: Toggle use of dynamic lighting.
- r_fullbright
-
Type: Toggle
Default:
0Description: * Non-functional. Toggles the light level on a map to maximum.
- r_graphheight
-
Type: Variable
Default:
15Description: Set the number of lines displayed in the various graphs.
- r_lightmap
-
Type: Toggle | glQuakeWorld
Default:
0Description: Toggles the display of light sources on the map.
- r_maxedges
-
Type: Variable
Default:
2000Description: Sets the maximum number of surfaces.
Note: A change in the value will only take effect after a map change.
- r_maxsurfs
-
Type: Variable
Default:
1000Description: Sets the maximum number of surfaces.
Note: A change in the value will only take effect after a map change.
- r_mirroralpha
-
Type: Variable | glQuakeWorld
Default:
1Range: 0.0 – 1.0
Description: Determines the level or reflectivness of special textures.
Values:
0.00– Mirror.
0.25– High reflection.
0.50– Medium reflection.
0.75– Low reflection.
1.00– Solid.
- r_netgraph
-
Type: Toggle
Default:
0Description: Toggle the display of a graph showing network performance.
- r_norefresh
-
Type: Toggle | glQuakeWorld
Default:
0Description: Toggle the refreshing of the display.
- r_novis
-
Type: Toggle | glQuakeWorld
Default:
0Description: Toggles the use of VIS information in maps.
- r_numedges
-
Type: Toggle
Default:
0Description: Toggles the displaying of number of edges currently being viewed.
- r_numsurfs
-
Type: Toggle
Default:
0Description: Toggles the displaying of number of surfaces currently being viewed.
- r_polymodelstats
-
Type: Toggle
Default:
0Description: Toggles the displays of number of polygon models current being viewed.
- r_reportedgeout
-
Type: Toggle
Default:
0Description: Toggle the display of how many edges where not displayed.
- r_reportsurfout
-
Type: Toggle
Default:
0Description: Toggle the display of how many surfaces where not displayed.
- r_shadows
-
Type: Toggle | glQuakeWorld
Default:
0Description: Toggles the display of shadows for entities.
- r_speeds
-
Type: Toggle
Default:
0Description: Toggles the displaying of drawing time and statistics of what is currently being viewed.
- r_timegraph
-
Type: Toggle
Default:
0Description: Toggle the display of a performance graph.
- r_wateralpha
-
Type: Variable | glQuakeWorld
Default:
1Description: Determines the opacity of liquids.
Values:
0.00– Transparent.
0.25– Low opacity.
0.50– Medim opacity.
0.75– High opacity.
1.00– Solid.
Note: On maps which have not been VISed with a transparent water, you have to use the
r_novis 1command to enable water tansparency. - r_waterwarp
-
Type: Toggle
Default:
1Description: Toggles whether surfaces are warped in a liquid.
- r_zgraph
-
Type: Toggle
Default:
0Description: Toggle the graph that reports the changes of z-axis position.
- rate
-
Type: Variable
Default:
2500Description: Sets the maximum amount of bytes per second that the server should send to the client.
Note: The higher the value, the smoother the movement. Value of 5000 is recommended for non-analog connections.
- rcon
-
Type: Command
Syntax:
rcon(password) (command)Description: Issue the set of commands to the server you are currently connected to or have set in rcon_address. You must know the rcon password for that specific server.
Example:
rcon foo map start - rcon_address
-
Type: Variable
Syntax:
rcon_address(address)Default:
(none)Description: Set the address where rcon commands will be sent if not currently connected.
Example:
rcon_address 123.123.123.123
rcon_address 123.123.123.123:27501
- rcon_password
-
Type: Variable
Syntax:
rcon_password(password)Default:
(none)Description: Set the password that will be sent automatically with the rcon commands.
Note: Setting the this variable will allow you skip the (password) part for future rcon commands.
Example:
rcon_password foo; rcon map start - reconnect
-
Type: Command
Syntax:
reconnectDescription: Reconnect to the last server.
- record
-
Type: Command
Syntax:
record(filename) (server)Description: Record a demo.
Example:
record foo.qwd 123.123.123.123:27501 - registered
-
Type: Toggle
Default:
1Description: Toggles if the game is registered or not.
- rerecord
-
Type: Command
Syntax:
rerecord(filename)Description: Rerecord a demo on the same server.
Example:
rerecord foo.qwd - say
-
Type: Command
Syntax:
say(string)Description: Broadcast a string to all other players.
Example:
say Hi Foo! - say_team
-
Syntax:
say_team(string)Description: Broadcast a string to teammates.
Example:
say_team Hi Foo! - scr_centertime
-
Type: Variable
Default:
2Description: How long in seconds the screen hints are displayed on the screen.
- scr_conspeed
-
Type: Variable
Default:
300Description: How quickly in the console screen scrolls up and down.
- scr_printspeed
-
Type: Variable
Default:
8Description: How fast the text is displayed at the end of the single player episodes.
- screenshot
-
Type: Variable
Syntax:
screenshotDescription: Captures a .pcx file of your current view. Automatically names based on the existence of other screenshots.
- sensitivity
-
Type: Variable
Default:
3Description: Sets the sensitivity of the mouse.
- serverinfo
-
Type: Command
Syntax:
serverinfoDescription: Report the current server info.
- setinfo
-
Type: Command
Syntax:
setinfo(key) (value)Description: Sets information about your QuakeWorld user. Used without a key it will list all of your current settings. Specifying a non-existent key and a value will create the new key.
Special Keys:
b_switch– Determines the highest weapon that Quake should switch to upon a backpack pickup. Example: b_switch 5 (Will only switch to the Super Nailgun, Nailgun, and weapons below and never to the Grenade Launcher, Rocket Laundher, and weapons above.)
w_switch– Determines the highest weapon that Quake should switch to upon a weapon pickup. Example: w_switch 5 (Will only switch to the Super Nailgun, Nailgun, and weapons below and never to the Grenade Launcher, Rocket Laundher, and weapons above.)
Example:
setinfo quote “I’m the only Foo!”
setinfo w_switch 5
- show_fps
-
Type: Toggle
Description: Toggle the display of the frames-pre-second value while playing.
Values:
0– Disables the display of the frames-per-second value.
1– Enables the display of the frames-per-second value.
- showdrop
-
Type: Toggle
Default:
0Description: Toggle the display of how many packets you are dropping.
- showpackets
-
Type: Toggle
Default:
0Description: Show all network packets.
- showpause
-
Type: Toggle
Default:
1Description: * Non-functional. Toggles the display of the pause graphic.
- showram
-
Type: Toggle
Default:
1Description: Toggles if the RAM icon appears when then game is running out of memory.
- showturtle
-
Type: Toggle
Default:
0Description: Toggle if the turtle icon is displayed when the frame rate drops below 10.
- sizedown
-
Type: Command
Syntax:
sizedownDescription: Reduces the screen size.
- sizeup
-
Type: Command
Syntax:
sizeupDescription: Increases the screen size.
- skin
-
Type: Command
Syntax:
skin(filename)Default:
baseDescription: Sets the skin name for the player.
Example:
skin foo - skins
-
Type: Command
Syntax:
skinsDescription: Download all skins that currently in use. Useful for refreshing skins without exiting the level.
Note: Same as
allskinscommand. - snd_noextraupdate
-
Type: Toggle
Default:
0Description: Toggles the correct value display in host_speeds. Usually messes up sound playback when in effect.
- snd_show
-
Type: Toggle
Default:
0Description: Toggles the display of sounds currently being played.
- soundinfo
-
Type: Command
Syntax:
soundinfoDescription: Reports information on the sound system.
- soundlist
-
Type: Command
Syntax:
soundlistDescription: Reports a list of sounds in the cache.
- spectator
-
Type: Toggle
Syntax:
specator(0|1|string)Description: Identifies the player as a spectator to the server and provides the necessary password.
Values:
0– Join a server as a player.
1– Join a server as a spectator.
(string)– Join a server as a spectator and provide the password.
Note: This command will only take effect if set before connecting to the server.
- stop
-
Type: Command
Syntax:
stopDescription: Stop recording a demo.
- stopsound
-
Type: Command
Syntax:
stopsoundDescription: Stops all sounds currently being played.
- stuffcmds
-
Type: Command
Syntax:
stuffcmdsDescription: Executes command line parameters.
Note: Used on startup.
- team
-
Type: Command
Syntax:
team(teamname)Description: Set the team name.
Note: The team command determines friendly fire and who hears
say_teammessages. - timedemo
-
Type: Command
Syntax:
timedemo(demoname)Description: * Non-functional. Plays a demo. Same problem as in Quake version 1.01.
- timerefresh
-
Type: Command
Syntax:
timerefreshDescription: Tests the current refresh rate for the current location.
- togglechat
-
Type: Command
Syntax:
togglechatDescription: Toggles the console.
- toggleconsole
-
Type: Command
Syntax:
toggleconsoleDescription: Toggles the console.
- togglemenu
-
Type: Command
Syntax:
togglemenuDescription: Display the menu screens.
- topcolor
-
Type: Command
Description: Shirt color.
Note: If the color is set to a large value,
666for example, the color will be changed to a random neon color at random intervals. - unbind
-
Type: Command
Syntax:
unbind(key)Description: Remove the current commands bound to a key.
- unbindall
-
Type: Command
Syntax:
unbindallDescription: Remove every key binding.
Note: Use with caution.
- user
-
Type: Command
Syntax:
user(user id)Description: Queries the user for his
setinfoinformation.Note: Use the
userscommand to obtain user ids.Example:
user 1234 - users
-
Type: Command
Syntax:
usersDescription: Report information on connected players and retrieve user ids.
- v_centermove
-
Type: Variable
Default:
0.15Description: How far the player must move forward before the view re-centers.
- v_centerspeed
-
Type: Variable
Default:
500Description: How quickly you return to a center view after a
lookuporlookdown. - v_cshift
-
Type: Command
Syntax:
v_cshift(red) (green) (blue) (intensity)Description: This adjusts all of the colors currently being displayed. Used when you are underwater, hit, have the Ring of Shadows, or Quad Damage.
Credit: Mr. Muh
Example:
v_cshift 16 32 64 - v_idlescale
-
Type: Toggle
Default:
0Description: Toggles whether the view remains idle.
- v_ipitch_cycle
-
Type: Variable
Default:
1Description: How quickly you lean forwards and backwards when
v_idlescaleis enabled. - v_ipitch_level
-
Type: Variable
Default:
0.3Description: How far you lean forwards and backwards when
v_idlescaleis enabled. - v_iroll_cycle
-
Type: Variable
Default:
0.5Description: How quickly you tilt right and left when
v_idlescaleis enabled. - v_iroll_level
-
Type: Variable
Default:
0.1Description: How far you tilt right and left when
v_idlescaleis enabled. - v_iyaw_cycle
-
Type: Variable
Default:
2Description: How far you tilt right and left when
v_idlescaleis enabled. - v_iyaw_level
-
Type: Variable
Default:
0.3Description: How far you tilt right and left when
v_idlescaleis enabled. - v_kickpitch
-
Type: Variable
Default:
0.6Description: How much you look up when hit.
- v_kickroll
-
Type: Variable
Default:
0.6Description: How much you lean when hit.
- v_kicktime
-
Type: Variable
Default:
0.5Description: How long the “kick” effects last.
- version
-
Type: Command
Syntax:
versionDescription: Report version information.
- vid_config_x
-
Type: Variable
Default:
800Description: Maximum x-axis screen size.
- vid_config_y
-
Type: Variable
Default:
600Description: Maximum y-axis screen size.
- vid_describecurrentmode
-
Type: Command
Syntax:
vid_describecurrentmodeDescription: Report current video mode.
- vid_describemode
-
Type: Command
Syntax:
vid_describemode(mode)Default:
(current display mode)Description: Report information on specified videomode.
- vid_describemodes
-
Type: Command
Syntax:
vid_describemodesDescription: Report information on all video modes.
- vid_forcemode
-
Type: Command
Syntax:
vid_forcemode(mode)Description: Force QuakeWorld to use a certain video mode.
- vid_fullscreen
-
Type: Command
Syntax:
vid_fullscreenDescription: Switch to full screen mode.
- vid_fullscreen_mode
-
Type: Command
Syntax:
vid_fullscreen_modeDescription: Set the full screen video mode.
Note: Changes will take effect on the next execution of the
vid_fullscreencommand. - vid_minimize
-
Type: Command
Syntax:
vid_minimizeDescription: Minimize windowed Quake.
- vid_mode
-
Type: Variable
Syntax:
vid_mode(mode)Default:
0Description: Sets the video mode.
- vid_nopageflip
-
Type: Toggle
Default:
0Description: Toggles the use of page flipping.
- vid_nummodes
-
Type: Command
Syntax:
vid_nummodesDescription: Reports the total number of video modes available.
- vid_stretch_by_2
-
Type: Toggle
Default:
1Description: * Non-functional. Stretch the pixles by a two fold to acheive proper view.
- vid_testmode
-
Type: Command
Syntax:
vid_testmode(mode)Description: Switch to another video mode temporarily for 5-seconds to test it.
- vid_wait
-
Type: Variable
Default:
0Description: Sets the type of waiting for the video adapter signal.
Values:
0– No waiting.
1– Wait for vertical sync active.
2– Wait for display enable active.
- vid_window_x
-
Type: Variable
Description: The x-axis location of the window.
Note: Only applicable if Quake is windowed.
- vid_window_y
-
Type: Variable
Description: The y-axis location of the window.
Note: Only applicable if Quake is windowed.
- vid_windowed
-
Type: Command
Syntax:
vid_windowedDescription: Switch to windowed mode.
- vid_windowed_mode
-
Description: Set the windowed video mode.
Note: Changes will take effect on the next execution of the
vid_windowedcommand. - viewsize
-
Type: Variable
Default:
100Description: Set the screen size.
Values:
30– Minimum size
120– Maximum siz.
- volume
-
Type: Variable
Syntax:
volume(volume)Default:
1.0Description: Set the volume for sound playback.
- wait
-
Type: Command
Syntax:
waitDescription: Wait a game tic.
- windows
-
Type: Command
Syntax:
windowsDescription: Switches away from QuakeWorld Client and back to the Windows OS.
Note: Does not work in the Gl nor Linux versions of QuakeWorld Client.
4. Command Line Parameters List
- +
-
Type: Parameter | OpenGL
Syntax:
+(console command)Description: Allow for the passing of console commands from the command line to the console.
Example:
winquake.exe +echo hi! +rcon_password foo - -allow360
-
Type: Parameter
Description: Allow the display of 360x video modes.
- -basedir
-
Type: Parameter
Syntax:
-basedir(directory)Description: Point to the Quake directory.
Example:
-basedir c:\games\quake - -bpp
-
Type: Parameter | OpenGL
Syntax:
-bpp(value)Description: Specify the bytes-per-pixel for the video mode.
Example:
-bpp 15 - -current
-
Type: Parameter | OpenGL
Description: * Unknown.
- -condebug
-
Type: Parameter
Description: Store the console text in the ‘
qconsole.log‘ file. - -conwidth
-
Type: Parameter
Syntax:
-conwidth(width in pixles)Description: Set the width of the console screen based on the resolution specified.
Example:
-conwidth 640 - -dinput
-
Type: Parameter
Description: Enable the use of DirectInput.
- -dibonly
-
Type: Parameter
Description: Enable windowed video modes only.
- -force
-
Type: Parameter | OpenGL
Description: Force the video mode.
- -game
-
Type: Parameter
Syntax:
-game(directory)Description: * Not implemented. Used to specify the directory where mod files were stored.
Note: Removed from use because of the new server
gamedircommand. - -heapsize
-
Type: Parameter
Syntax:
-heapsize(kilobytes)Description: Amount of memory allocatted in kilobytes for Quake.
Example:
-heapsize 24576 - -height
-
Type: Parameter | OpenGL
Syntax:
-height(height)Description: Specify the height of the video resolution to run.
Note: You also need the
-widthcommand.Example:
-width 512 -height 384 - -minmemory
-
Type: Parameter
Syntax:
-minmemory(kilobytes)Description: Allocate the minimum amount of memory for Quake.
- -mode
-
Type: Parameter | OpenGL
Syntax:
-mode(video mode)Description: Specify the video mode.
- -noadjustaspect
-
Type: Parameter
Description: * Unknown.
- -noautostretch
-
Type: Parameter
Description: Disable the streching of high resolutioins through pixel doubling.
- -nocdaudio
-
Type: Parameter
Description: Disable Quake’s ability to play CDs.
- -nodd
-
Type: Parameter
Description: Disable DirectDraw support.
- -noddraw
-
Type: Parameter
Description: Disable DirectDraw support.
- -nodirectdraw
-
Type: Parameter
Description: Disable DirectDraw support.
- -noforcemaccel
-
Type: Parameter
Description: Disable the forcing of mouse acceleration on startup.
- -noforcemparms
-
Type: Parameter
Description: Disable the forcing of mouse parameters on startup.
- -noforcemspd
-
Type: Parameter
Description: Disable the forcing of mouse speed on startup.
- -noforcevga
-
Type: Parameter
Description: Disable the forcing of the VGA 0x13 video mode on startup.
- -nofulldib
-
Type: Parameter
Description: Disable fullscreen, borderless window video modes.
- -nojoy
-
Type: Parameter
Description: Disable joystick support.
- -nolan
-
Type: Parameter
Description: Disable networking support.
- -nomouse
-
Type: Parameter
Description: Disable mouse support.
- -nosound
-
Type: Parameter
Description: Disable sound support.
- -notriplebuf
-
Type: Parameter
Description: Disable tripple-buffer page flipping for the video.
- -novbeaf
-
Type: Parameter
Description: Disable VBE/AF support.
- -novesa
-
Type: Parameter
Description: Disable VESA suppoart.
- -nowd
-
Type: Parameter
Description: Disable VESA support in favor of DirectX or windowed display.
- -nowindirect
-
Type: Parameter
Description: Disable VESA support in favor of DirectX or windowed display.
- -particles
-
Type: Parameter
Syntax:
-particles(value)Description: Specify the maximum amount of allowed particles.
Example:
-particles 40000 - -primarysound
-
Type: Parameter
Description: Use DirectSound’s primary buffer output for sound instead of secondary buffer output.
Note: Using this will increase performance but might not work on all systems.
- -resetwinpos
-
Type: Parameter
Description: Reset the positions for the Quake’s window.
- -safe
-
Type: Parameter
Description: Start Quake in safe mode.
- -simsound
-
Type: Parameter
Description: Disable sound playback but simulate sound playback for code testing.
- -snoforceformat
-
Type: Parameter
Description: Disable Quake’s forcing of sound hardware into 11KHz, 16-bit mode.
- -starttime
-
Type: Parameter
Description: * Unknown.
- -startwindowed
-
Type: Parameter
Description: Start Quake in a windowed mode.
- -stdvid
-
Type: Parameter
Description: * Non-functional.
- -surfcachesize
-
Type: Parameter
Syntax:
-surfcachesize(kilobytes)Description: Amount of memory allocated in kilobytes for the surface cache.
Example:
-surfcachesize 2048 - -wavonly
-
Type: Parameter
Description: Disable DirectSound support in favor of WAV playback.
- -width
-
Type: Parameter | OpenGL
Syntax:
-width(width)Description: Specify the width of the video resolution to run.
Note: You also need the
-heightcommand.Example:
-width 512 -height 384 - -window
-
Type: Parameter
Type: Parameter | OpenGL
Description: Run in a windowed mode.
- -zone
-
Type: Parameter
Syntax:
-zone(value)Description: Allocate additional memory to the alias memory space.
Note: Usually necessary when loading large Quake scripts.
Example:
-zone 512
5. Version Information
May 18, 2000
- Updated the legal and licensing terms of this document and it is now released under the Free Software Foundation’s GNU Free Documentation License, Version 1.1.
- Removed the links to the Cascading Style Sheet file which was providing the stylistic markup for this document in order to solve an existing major problem with troublesome web serving software and to promote better accessibility and availability of this document for the future at the price of removing the coloring and formatting markup from this document.
- Changed the format of my email address from URL format to a proprietary format in order to defeat the automatic gathering of my email address by web crawler software and to prevent the increasingly annoying barrage of unsolicited commercial advertisements that I have been receiving.
- Removed all other HTML LINK tags to prevent future problems with web serving software.
- Renamed the Index section to Table Of Contents to correct this long lasting mistake.
November 6, 1998
- New legal terms for this document. It is now released under the Free Software Foundation’s GNU General Public License Version 2.
October 11, 1998
- Added the missing
qportcommand thanks to David Jonsson for pointing it out.
September 29, 1998
- Updated the HTML markup in the document. This should be the last such update because I think I solved all of the previous problems with HTML and the correct display of this document.
- Added my email address to the Abstract section. It was been removed long time ago because of too many emails, and I hope that this isn’t the case this time.
- Updated the HTML 4.0 deceleration to include the URI of the DTD, as stated in the standard.
- Added the MIME Content-Type and Content-Language fields to explicitly set the character set encoding and language information.
- Added HTML meta information to each document to include all necessary header information to help search engines.
- Changed the Modified: field to Last Modified:, and Location: to Source: to avoid ambiguity.
- Changed the formatting for the lists of commands and parameters from heading section based formatting into definition list formatting with each command or parameter being the definition term and the fields being the definition data. This is the proper way to display this information in HTML avoiding excessive H3 and BLOCKQUOTE tags which were not being used correctly in the previous versions of this document.
- Changed the usage of bold and italic stylistic markup in order to facilitate better display of this document in browsers which do not support Cascading Style Sheets.
- Updated the document because of QuakeWorld v2.30 release.
- Added commands:
cl_chasecam,crosshaircolor,gl_cshiftpercent.
July 20, 1998
- I have removed my email address from this document because I was getting unwanted emails. If you want to contact me, go to my web site.
July 16, 1998
- Changed the internal HTML style for indentations and also to space out the fields for easier reading.
- Added subsection 6.4. Trademarks in the 6. Legal section to take care of any trademark legalities.
- Added a copyright notice to the Abstract section along with a short description about this document.
June 19, 1998
- Updated document because of QuakeWorld v2.21 release.
- Added the
cl_maxfpsvariable. - Added the
-condwidthcommand line parameter.
June 9, 1998
- Modified the document because of the site redesign.
- Revised parts of the Legal section to enforce stricter standards for the display and distribution of this document.
May 23, 1998
- Changed the HTML formatting that was used to display the fields for each of the console commands. This new style will conserve a lot more space.
March 13, 1998
- Made some formatting changes.
- Added the Abstract section to identify this document.
- Removed the
-actioncommands. - Added links to each individual command.
January 19, 1998
- Made a few HTML changes.
January 16, 1998
- Added the
show_fpscommand. - Added the missing syntax field for the
crosshaircommand.
November 7, 1997
- Added the
gl_subdivide_sizevariable command which improves OpenGL performance by cutting down on the number of sky brushes.
October 29, 1997
- Updated the
crosshairtoggle command do to the release of QuakeWorld Client v2.1
October 26, 1997
- Made a few more minor HTML changes and incorporated support for Cascading Style Sheets into the document.
October 22, 1997
- Made a major change to the HTML structure.
- Removed all stylistic HTML tags to achieve 100% HTML compliance.
Septermber 12, 1997
- Fixed a few extranious Type: fields for the OpenGL paramters.
- Added a description to a new feature found for the
topcolorandbottomcolorcommands. - Removed unused anchors that were left for every command.
August 10, 1997
- Update for version 2.0 of the QW client.
- Added command line parameters:
-dinput,-zone. - Added commands:
cl_crossx,cl_crossy,cl_hudswap,cl_sbar,cl_solid_players,rerecord. - Added another parameter to the
noskinscommand.
August 2, 1997
- Changed the status on the Unknown glQuake commands to Non-functional thanks to Zanshin’s info.
July 29, 1997
- Added a list of command line parameters.
July 18, 1997
- Added an example to the
packetcommand.
June 14, 1997
- Updated for version 1.64 of the QuakeWorld Client
- Added the following commands:
+-showteamscore,cl_hightrac - Changed the following commands:
record,playdemo,stop - Added a few default values that were missing
- Minor formatting fixes
- Added glQuakeWorld commands.
April 21, 1997
- Original Release.
6. Legal
6.1. Copyright
This work is copyrighted pseudonymously by the author under all applicable laws. The author reserves all rights to this work. The copyright statement for this work is “Copyright (C) 1997-2000 JakFrost, All Rights Reserved”.
6.2. License
Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.1 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts and no Back-Cover Texts. You can access the license at http://www.gnu.org/copyleft/fdl.html or you can write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA to request a copy. Please preserve all authorship and contact information when distributing or modifying this work. All derivative works or works containing parts of this work must be released under the same license or a later version of it.
6.3. Trademarks and Servicemarks
All trademarks and servicemarks used in this work are acknowledged and are the property of their rightful owners.
6.4. Warranty Disclaimer
THIS WORK IS PROVIDED “AS IS” WITHOUT ANY WARRANTY; WITHOUT EVEN THE IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THE AUTHOR IS NOT LIABLE FOR ANY RESULTS ARRISING FROM THE USE OF THIS WORK. ALL RISKS AND RESULTS THEREOF FALL ON THE USER.
Copyright (C) 1997-2000 JakFrost, All Rights Reserved